vacuum wiper motor fc help

[greg windon]

would any one have a vacuum wiper motor for a fc in working order as my one has not got enough suction to opperate the wipers i have pulled mine appart to repair it but cannot work out why it has no grunt  im on the central coast gosford area

[Ken McLean]

Greg, cause of failure is air leaking past the paddle due to the rubber being worn flat.  Good second hand ones can be tested by holdin your thumb over the inlet pipe whilst operating the wiper by hand (switch in the on position) A good motor will provide resistance to turning.   I have some good ones if you get deperate - you have my email address   Ken McLean