News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

FE Hood/Roof Lining Installation

Started by FC-V8, December 18, 2000, 01:00:00 PM

Previous topic - Next topic

FC-V8

Does anyone have any photos, instructions, anything! on installing the roof-lining in sedans. I didn't strip the car so I have now idea how to put it back.
What it to rev ? install a CHEV !
0401-065-201

chris stokes

Yep

2 quickies;

Don't forget to pull the interior light wires through first.

When closing the dagger trap type clamp thing along the outer sides, wrap electrical tape around the jaws of a large set of multi grips and use the width of the jaws to close the clamp with nice control. Its also another late night technique for the restoraholic to keep on working without noise

mcl1959

Glenn,  do you have a workshop manual ?  The installation of the headlining is described in detail including the manufacture of special tools needed for the job.  I have made the tools as described and found that they work fine.  If you don't have a manual, I can get one for you.

Ken