News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Rear wiring cover/grommets near the taillights

Started by Roybeth, April 30, 2018, 08:05:45 AM

Previous topic - Next topic

Roybeth

Hoping you know what I mean, may have to take a pic - but does anyone know a source for these

59wagon


mcl1959

Or do you mean the piece of hose about 10 cm long with a grommet each end which protects the wiring where it is exposed to the road.
Ken

Roybeth

Quote from: mcl1959 on April 30, 2018, 09:48:46 PM
Or do you mean the piece of hose about 10 cm long with a grommet each end which protects the wiring where it is exposed to the road.
Ken

Yes, I thought it was one piece. I had figured that I could probably do the same thing with some hose and a grommet for each end - but perhaps that is actually what it is then, so yes I am referring what you have described above.

Helen

mcl1959

Roybeth, yes original is one piece, but most I have seen are rock hard and cannot be used.
In the van I built I used a piece of hose and two grommets glued together with loctite

Regards.  Ken

Roybeth