Bolts and screws wanted

[oldgrey58]

Hi,
I'm after the screw bolts and washers that hold the guards onto the K-frame and also the grill etc. It's the self tappers that you see along the edge of the guard when you open the hood.

I'm after 10 or 20 or so. More are welcome if you want to do a job lot.

I'm also after a collection of the screws that hold the scuff plates down.

I'm in Melbourne so pick up preferred but happy to pay for postage on top of the cost

I'm also happy to come to you and remove them myself if you have a wreck.

Thanks

Frank

[NES304]

Have you thought about going to your local bolt shop to match them?


Sent from my iPhone using Tapatalk

[JOX515]

Got some here in Ballarat - will check how many in the morning.

Scuff plate screws I got from Bunnings.....

Cheers, Graeme

[DJ]

Have you thought about going to your local bolt shop to match them?

Yes, a lot of your requirements like scuff plate screws can be matched easily at your local specialty fastener outlet.
I found matching the screws for the guards a little more difficult but on line shopping provides access to world wide suppliers.
There was an Aus supplier & a US supplier - both were around the same in total with postage included.
e.g.   http://www.ebay.com.au/itm/201117574038?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Finding the correct washers could be another challenge. Here's a local Vic wrecker who has helped me with some hard to find parts ...... http://www.warburtonearlyholdenspares.epage.at

[JOX515]

Got a couple dozen of the guard screws and washers......

[mcl1959]

I have many tins of nearly every screw, bolt, clip and pin from cars I have wrecked over the years.

I'm in Hoppers Crossing in Melbourne.

No handbrake cable clips left, at one stage I had over a dozen of these.




Ken