Steel Brake Line on diff housing

[drusse]

Gents,
I have burred the nut connecting the steel pipe to the wheel cylinder on the rear passenger side. I have been able to remove the pipe by disconnecting it on the drivers side at the brass junction block.
Does anyone know whether a brake repairer can replace this nut or do l have to buy a new complete pipe?
Any suggestions would be appreciated.
David

[MattFC]

Hey mate, I did exactly the same thing! if the pipe is long enough, they can cut the end off, flare it and fit a new nut. I think it cost about 15 bucks from memory. Make sure you use the proper flare nut spanners! I didn't.....

[drusse]

Many thanks for your advice.