News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Temperature Sender

Started by Rod, May 18, 2013, 11:15:21 AM

Previous topic - Next topic

Rod

Hi All, I have had a look around and can't find the answer specifically. I have three temp senders in my posession. One is a 217°F ,one is a a 226 F, while the last one is a 239F. I need to replace a faulty one. Which one should i use? Is a standard grey running a 7lb radiator cap.

Stewy

Hi Rod,
The manual section 12F says
"Tell Tale" Assembly-
Temperature, Glows when    ..   ..  ..  Engine Temperature reaches 217 degrees F. + - 5 degrees F.

Cheers Stewy   8)
No matter how much you push the envelope, It'll still be stationery

mcl1959

The 217 F switch is fitted to fx - FE up to eng L388857 which had the 4 lb cap. When the 7 lb cap was fitted the switch changed to the 226 F one.
Ken

Rod

Thanks Stewy and Ken,

After viewing your post Stwey I looked at the manual and it confirmed what Ken said. Based on this I guess there wouldn't be a problem using a 217F. It would just mean the idiot light would come on earlier. Given that greys should run at about 180F would my assumption be sound?

Thanks again fella's.

Rod