News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Ute tailgate adjustment

Started by FC-V8, June 09, 2012, 07:06:05 PM

Previous topic - Next topic

FC-V8

Hi guys

I got a tailgate for the ute, which is in good condition except that the countersunk screws in the hinges were seized, I got a few out with a left handed drill bit but the rest i had to drill them completlely out and put 10m nutserts in. My question is where the hinges attach to the body with the captive nut are they adjustable? I haven't undone those screws as yet.

Cheers
Glenn 
What it to rev ? install a CHEV !
0401-065-201

collecta

  Hi Glenn,

     no real adjustment at either end of the hinge.

   Cheers
   Scott
i collect old holdens coz they never die!