News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Wilsonia Gauge

Started by KFH, March 23, 2012, 10:50:44 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

KFH

March 23, 2012, 10:50:44 PM
I have came across a Wilsonia gauge. Somebody removed from a vehicle by cutting wires and oil pressure line.  The original oil pressure line was small diameter copper tubing. Should I use copper tubing or the more modern "plastic" tubing?

Keith

I was born with nothing and still have most of it left

graham_fuller

#1
March 23, 2012, 10:59:20 PM
Hi Keith,
I have had a wilsonia gauge for many years with plastic tubing and no problems. I have also seen them piped in copper. Im sure either is fine.
Cheers,
Graham

KFH

#2
March 24, 2012, 10:26:11 PM
Thanks Graham

Keith
I was born with nothing and still have most of it left
Print
Go Up Pages1
User actions