News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

RATTLE IN GEAR LEVER IN 3RD GEAR

Started by graham_fuller, January 30, 2012, 07:54:05 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

graham_fuller

January 30, 2012, 07:54:05 AM
Hi All,
My gear lever has an annoying rattle in 3rd gear, i have replaced the selector lever rubbers but still there. When i lift the lever ever so slightly it stops. Any suggestions?
Cheers,
Graham

fcwrangler

#1
January 30, 2012, 08:34:29 AM
Graham, could be a worn pin at the honeypot, try a bit of lube stick or grease on it.
Jim
on the seventh day: God Made Holden

mcl1959

#2
January 30, 2012, 08:44:23 AM
Also check that the spring is still in place in the end of the gearstick. Sometimes the spring falls out when you remove the gearstick and you dont notice it. This can create a rattle in the honeypot area.

Ken
Print
Go Up Pages1
User actions