News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

FE scuff plates and other parts

Started by fe2ek, April 13, 2003, 08:11:16 PM

Previous topic - Next topic

fe2ek

After a set of scuff plates?(The metal strips that go in the bottom of the door openings that hold the vinyl mat).Only need 2 front ones.

Also reuire,
Black plastic covers that go on the lower edge and back of the front seats.
Spare wheel retaining bracket for a ute.

Panel that goes across the front of the car ,under the bonnet,bolts between the front guards and has the bonnet catch bolted to it.

FE bonnet mascot.       Regards  Geoff

slim

I have the front panel you need also Fe bonnet emblem , But no insert for it, If your in Sydney call me on 0402465768  Slim . May also have scuff plates .
Im located at Liverpool, NSW

Ed

If Slim can't help you, I may have a set of front FE.
have to check.  I am using FC scuffs instead.

if the ute fronts are the same as sedan fronts..

I found these things very hard to find...  


Cheers

Ed
in the shed