News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

tyres size problem

Started by zl296, January 20, 2012, 05:42:30 PM

Previous topic - Next topic

zl296

brought some american racing mags.
13x8inch  x4.
went looking for tyres...around gippsland...
not much luck.all to small
need 225/50/13,s
any idea,s around dandy area....
or someone knows somewhere... :P
die young and leave a good looking corpse...

John253a

why are you after low profile tyres?
a standard replacement for 6.40x13 in a 225 would be 225/60r13 or 225/65r13  to keep the speedo accurate

on the other hand i not most shop do a 225/55r13 as i use to run then on another car

zl296

they are going on ej van.
dont want any rubbing.
do you reckon higher proile will be ok....
dave.
die young and leave a good looking corpse...

John253a

cant comment on that as i dont have or no any one with one,
but i run 205/55r15 front and 225/50r15 rear on my fc and its lowered 40mm (15x6" rims)
and i only rub when i hit big bumps, witch isn't very often,

if you rim offset is correct they should fit if not look at 215/65r13

zl296

will search bigger tyre places....
see what they have... :-\
die young and leave a good looking corpse...

Glenn 'Stinky' Stankevicius

Do a search on this forum or the FB/EK forum, I am sure this has been covered recently.