Old heater removal methods

[fe350chev]

hi

my heater is pretty much rusted on, nuts wont come off. got 1 off, others pretty hard cos keep spinning, there is a spacer at the back. Is the best way to partially disassemble the heater, taking off the clips at front, then holding the bolts somehow? its a smiths. tried multi grips. dont wanna damage heater or firewall.

thanks in advance.

[mcl1959]

Try vice grips

Ken

[FCRB26]

cut the nuts off and just fit new bolts and spacers when dissasembled.

[fe350chev]

thats what i wanted to hear hoon, just wasnt sure if this was possible without butchering the heater, they will be buzzed off first thing now  ;)

[mcl1959]

It depends how good you "buzz" ;D

Ken

[fe350chev]

My wife is good with the buzzer thing, maybe Ill get her to do it  :D

[FC427]

My wife is good with the buzzer thing, maybe Ill get her to do it  :D

Tooooo much information  :o :o :o :o :o......FC427.......

[FCRB26]

Maybe FEWITHRB30 spends too much time on the internet thats why she needs a buzzer thing? ;D

[fe350chev]

As long as we don't have to talk to each other every thing is fine  ::)

[GMVAN]

I found the easiest way to remove it is mark out on the firewall where it is bolted and then cut the living shite out of the firewall and there you have it, the heater will fall towards the grill thus giving you an easier way of removing the bolts without too much damage to the heater!!!!! ;D

[fe350chev]

ha ha id hate to see u remove the seats, doors, engine etc lol  :D