News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Blinker not blinking in 2nd gear

Started by AndyJ, August 14, 2010, 01:26:28 PM

Previous topic - Next topic

AndyJ

I wonder if anyone knows what can cause this? The blinkers work fine when the car is in Neutral, 1st, 3rd and Reverse, but in 2nd Gear the blinker stops to flash. Is there something about the linkage position in 2nd that is causing this?

thanks

Andy

ACE

G'day Andy,
If you have a reverse light switch fitted to your car then check the adjustment ;)
Regards ACE  8)

FCRB26

Is your car nick named christine by chance?
it could be possesed.

Like ace said probably an electrical gremlin with the switch.

EKjimmy

She's not leaking, she's marking her territory

Jimmy

Glenn 'Stinky' Stankevicius

My sedan which has an HR column had a habit of sounding the horn on some turns  ::) not all the time and not always the same conditions. I'd suggest some damaged wiring in the column.

FC0058

Hi Andy
I had some issues with my blinkers and horn approx 4 years ago,  occasionally the blinkers would go on the blink for no good reason, and then the horn would go off occasionally when I turned hard left.

It turned out that the wires in the column had rubbed through and would short out occasionally hence the problem. I replaced the wiring put a couple of connectors in the horn wiring for easy access, horn problem reappeared at the last nationals so I have disconnected it and now use the universal internationally recognised silent horn to display my frustration.

Cheers Jim
Forgiveness is easier than permission.