Sump for rack

[jasonr70002]

Hey all just wondering if anyone has a rear rack conversion on a hr front end and if someone does can you tell me what mods are needed for the sump on a red 6 eg placement and measurements of cut out section.

Cheers Jason

[FC427]

If you use an EH sump no modification is needed the oilfilter adapter of a Starfire 4 is required to give clearance for the steering shaft .....FC427.....

[jasonr70002]

I have an LC-LJ sump which is the same except it is flat all the way from the front to the hump and doesn't have the step down. Are the oil adaptors hard to source.

[FCRB26]

Remote oil filter kits are fairly cheap from any good auto  shop fitted one to a mates V6 in his HR i supposse they make them universal was $80 from memory.

[jasonr70002]

Thanks for that FCHOON will check it out.

[FC427]

. Are the oil adaptors hard to source.

Easy to get the last one I bought from the wreckers cost $5 I took it of a Toyota as there were more Starfire 4's  [Holden 6 with 2 cylinders cut of]  fitted to them than Commodores it is a factory GMH part .....FC427......

[jasonr70002]

Good to know mate, What Toyota did they come in cause I know very little about tojos.

[FCRB26]

That would be the most beutiful elegant
toyota Corona Bucket of crap.

*80,S model