News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

6litre into an FC,legal in SA?

Started by FCLS2convos, March 08, 2010, 12:30:53 PM

Previous topic - Next topic

FCLS2convos

just after some info and Ideas if anyone has any experience putting the late model engines and gearboxes into Fcs.Cheers for the feed back.

pedro

G'day FCLSconvos and welcome to the site, not sure about the 6ltrs. but if you check out "cars being built" you'll find a few interesting projects with V8's, also try typing what you are looking for into the search bar and you should get a few interesting results.
                      Pedro
I love animals - they taste great

F4+

stapla

Hi Mate,

I live in SA and did a bit of checking around to see if I could put a GEN3 in a LJ torana.  I found a lot of misinformation around.  There is no precise rules for engine size vs vehicle weight.  There is some recommendations, but yours (and mine) fall outside this.

Bottom line is in SA you can put whatever you want in, as long as an engineer and regency say its ok.

I engaged an engineer to do a proposal to dept transport.  Regency responded with approval in principle and a statement of requirements.  They pretty much want a bunch of tests like braking, lane change etc.

I'd budget $300ish for initial engineer proposal, then about $2k at the end to do all the tests.

Cheers
Peter.


Glenn 'Stinky' Stankevicius

Just went for a ride in a legally registered blown Chev small-block EK Sedan, no seatbelts either  :o
Great experience (after changing my jocks  :-[ )
As stapla said, you'll need to get the engineer involved, the earlier the better.