News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Steering problem

Started by jasonr70002, February 15, 2010, 01:38:34 PM

Previous topic - Next topic

jasonr70002

Hey guys just wondering what type of steering box I need to use with a HR front end with HR drag link set up. Is it an FE with a HR steering arm or a HR steering column swap.
cheers Jason
Golden Holdens FE-FC

EffCee

Steering box is up to you, FE FC have the longest column, FB EK are about 50mm Shorter and EJ EH are about 50mm shorter again IIRC. HD HR columns are too short to be comfortable, Whatever steering box you use, you will need to use the HD HR Pitman arm. The HD HR pitman arm will fit on all the steering boxes.

Keith
Canberra, ACT

F4+ ;)

FC427

Quote from: EffCee on February 15, 2010, 01:43:31 PM
Steering box is up to you, FE FC have the longest column, FB EK are about 50mm Shorter and EJ EH are about 50mm shorter again IIRC. HD HR columns are too short to be comfortable, Whatever steering box you use, you will need to use the HD HR Pitman arm. The HD HR pitman arm will fit on all the steering boxes.

Keith
Pretty sure EJ EH HD HR are all the same length  HD HR only has two mounting points for the steering box to subframe as EJ EH has 3 and the holes need a little work to align ....FC427......
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride