News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

kig pin oversize replacements

Started by Gary C, September 21, 2009, 04:11:53 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Gary C

September 21, 2009, 04:11:53 PM
hi all, when replacements are needed for king pins and bushes for standard fc front end "oversize and reaming" is mentioned what is actually oversize, Im thinking it must be the od of the bushes but cant work out why. Also would an average type engineering shop have what is required for the reaming if needed. Thanks Gary C
Print
Go Up Pages1
User actions