News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

steering cloumn

Started by Fc1958, August 22, 2009, 01:19:58 AM

Previous topic - Next topic

Fc1958

anyone want to type out a quick mudmap on how to get one of these outta a fc? only that and the handbrake till i can crack the front end off :)
“Old Holdens never die… they just go faster!”

RET

I think this is everything...

* Disconnect pitman arm

* Disconnect wiring

* Disconnect gear shift linkages

* Remove plates at firewall around steering column

* Unbolt column from subframe

* Remove clamp under column at dashboard end

* Pull steering box end of column into car, remove through back door. If front seat has been removed, this is substantially easier.

Hope that makes sense. Ring me, by the way, if you want to meet up for Eastern Creek.
OurCarClub.com.au is a web-based data management application, custom built for car clubs and their volunteer officials. More info...

Fc1958

Rang @ 1700 but phone off 94840105 if you are still going mate :)
“Old Holdens never die… they just go faster!”

mcl1959

It can be difficult to get the steering box out from around the pedals - I usually find it easier to take the steering box out forward into the engine bay. Drop the honey pot below the pedals and then up behind them. If your pedals are out then you can do it just as easy either way.

Ken

Fc1958

Steering Column out :)   tnx for the help.
“Old Holdens never die… they just go faster!”