News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

clutch slave cylinder

Started by 9fc059, December 11, 2007, 10:48:37 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

9fc059

December 11, 2007, 10:48:37 AM
My clutch slave cylinder quit on my FC last night. Re conditioning it is out of the question as the piston and cup are seveley damaged. I was wondering can a much more common slave cylinder out of a hr be retrofitted. anyone done this to their FC before? Gearbox is the good old crash box.
Cheers

customFC

#1
December 12, 2007, 12:05:44 AM
The HR slave cylinder in a HR is an internal set up and quite different.
You should be able to get the parts you need to fully rebuild the original, and if it is in good order, works fine. Why muck around with mods for no real gain.
Regards
Alex

fastjbav6

#2
December 12, 2007, 01:52:04 PM
New Slave cyl's are available. Just replace it and if the hose looks old replace that as well.

Regards Seb
Yellow Knight
             
Print
Go Up Pages1
User actions