News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Speedo malfunction

Started by NES304, August 13, 2007, 07:46:13 PM

Previous topic - Next topic

NES304

Speedo is no go and the odometer still ticks over. brass bit at back spins loosly.... Any ideas?



NO NAME

if the speedo is out of the dash but together and you shake it around or quickly turn it anti clockwise does the needle jump or does it seem stuck?

mcl1959

If the odometer is working then the problem is with the speedo head itself. In any case the speedo will have to be removed and dismantled.  Could be stripped gear or broken spring or just gears out of alignment.

Ken

NES304

I have two here and I ripped em both apart.
Springs seem to be good. Shafts are sticky but now oiled.
Does oil go under the aluminium bit on the right?

It does not seem to spin freely here