Dismantling dash fascia

[TAYZ]

In between night shifts i decided to pull out my dash fascia as i am putting in a chrome one.  I got it all out apart from the light switch.  How do i get the light switch out wothout breaking anything?  There does not seem to be a screw or anything holding the system to the rear of the fascia.  Sometimes I think i should leave stuff to my mechanic...... :P

                                                                          tayz

[oldgmh]

hi Tayz

To get the light switch out you must depress the little dimple on the rear casing of the switch, then pull out the knob with the shaft ( as though you were turning on the headlights).  Then use a wide flat screwdriver to unscrew the slot on the fascia/dash. The switch will then be removable from the back of the dash.

have fun.   ;D ;D

[Brad]

Hey Tayz
             The retaining plunger is on the top of the switch block behind the dash facia. pull the switch to the full on position ,depress the plunger ,  then pull the knob out , undo the slotted retainer ,disconnect wires and you should have it.
                 Brad.
  Ps if you have any probs PM me and I will e mail you the pics from the workshop maual.

[TAYZ]

Thanks heaps fellas, took me less than a minute to get out

                                                            tayz