wiper arms out sinc

[Phantom]

G'day all,
                      Just put in my new two speed wiper motor(thanks heaps Ken) , but me running true to form have stuffed it up somehow,apart from dropping nuts down the heater opening for the demister hoses , i have managed to have the wiper arms going at different times, well out of sync, can someone tell me what i have done ?I am pretty sure i put them back how they came off but its got me buggered.
                                Cheers Rusty

[JB]

This one is tricky... Basically it's hit and miss where you have to adjust the arms via the wiper motor spindle.

I had to do mine a tooth at a time untill I got them back in sync. That is undo the nut, and advance the cog one tooth until you get the correct position.

Cheers
Jason.

[Just40]

ok you have the short arm coming off the motor the arm for the passenger side goes there,and the driver side goes the other end.

[Just40]

http://www.fefcholden.org.au/cgi-bin/yabb/YaBB.cgi?board=hotup;action=display;num=1059089148;start=16
there is a photo in this thread,just like that.