News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Electrical problems

Started by ASUS, February 04, 2007, 04:32:50 AM

Previous topic - Next topic

ASUS

I've traced through the wires, fuses, and got to the voltage regulator.

unplugged it placed it back in and electrics came back.

Went to start the car and all went dead.  removed the clips from regulator re55 bosch and the electics came back.

any Ideas.

mcl1959

Sounds like regulator is certainly dead, I would try replacing it rather than fixing it.

Ken

ASUS

Thanks Ken,

Had a couple from my club come around.  We found some wiring which had been soldered, and as a result the main wire was rather thick, and the solder did not grip the main wire rather then formed a ring around it. We believe the corosion between the wire and the solder formed a barrier which stopped the circuit.

Cleaned it all up and away she goes. I know have a spare regulator.  All I say is when you solder ensure that you get the main wire hot enought to get solder into it