FE-FC Holden Discussion Forum
November 25, 2024, 03:56:42 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.
 
   Home   Help Search Calendar Login Register  
FE-FC Holden Discussion Forum > Technical Board > Modification Help (Moderators: RET, Glenn 'Stinky' Stankevicius, gp) > Rebuilding HR Front End (Part 3)
Pages: [1]   Go Down
« previous next »
  Add bookmark  |  Print  
Author Topic: Rebuilding HR Front End (Part 3)  (Read 1859 times)
Glenn 'Stinky' Stankevicius
Moderator
Guru
*****
Offline Offline

Model: FE and FC
Posts: 5135


Willaston, South Australia


Glenn.Stankevicius
View Profile
« on: November 06, 2004, 07:56:31 AM »
0
Does anyone have the dimensions for the spacer tool 3A11 that is used to install the lower control arms on an HR front end and the 3A12 for the upper control arms?
Or is there another trick I can use?
« Last Edit: November 06, 2004, 07:57:57 AM by stinky » Logged
http://forum.fefcholden.club/index.php/topic,18001.0.html
mcl1959
vic-club
Guru
*****
Offline Offline

Posts: 6155


FE's rule


View Profile
« Reply #1 on: November 07, 2004, 08:33:53 AM »
0
The tool is only needed when fitting NOS lower arms because they have no thread in them.  Set the arm up in place on the bolt and then make a spacer which just fits in the gap between the arm and the crossmember.

Ken
Logged
Glenn 'Stinky' Stankevicius
Moderator
Guru
*****
Offline Offline

Model: FE and FC
Posts: 5135


Willaston, South Australia


Glenn.Stankevicius
View Profile
« Reply #2 on: November 07, 2004, 11:11:10 AM »
0
Cheers and thanks Ken, didn't get to it today anyway, on account of babysitting the tribe.
Logged
http://forum.fefcholden.club/index.php/topic,18001.0.html
Pages: [1]   Go Up
  Add bookmark  |  Print  
« previous next »

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.033 seconds with 20 queries.