FE-FC Holden Discussion Forum
November 27, 2024, 10:29:56 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: The FE-FC Holden Car Club of NSW are proud to host the 19th FE-FC Holden Nationals. Check out the announcement video for more.
 
   Home   Help Search Calendar Login Register  
Pages: [1]   Go Down
  Add bookmark  |  Print  
Author Topic: 3speed to 4speed?? is it worth it?  (Read 4090 times)
fc_special
Newbie
*
Offline Offline

Posts: 7


working on getting my fc pic here


View Profile
« on: February 22, 2004, 07:50:11 AM »
0

Hi everyone...driving to the city the other day i felt like the 138 needed a fourth gear..Will i lose alot of value to the car if i put a 4speed gearbox in??.The gearshift is already on the floor...i have been told a toyota 4 speed would suit best is this right??
Logged
robbzfc58
Guru
*****
Offline Offline

Posts: 1130


Gone but not forgotten.


View Profile
« Reply #1 on: February 22, 2004, 08:25:16 AM »
0

hi there   im no expert so my opinion may be worth nothing..but the ratio in top gear on 3 or 4 speed is the same..so nothing would be gained if you were looking  for taller gearing.   if you went to 5 speed toyota ,you'd have the ultimate but you would rarely use 5th gear because its an overdrive..the car would struggle on hills.     personally  i think the phillipino 4sp boxes from uc toranas & early commodores(4&6 cylinder cars had same box) are  nicer than the aussiebox& cheaper..my boys have thrashed em & never killed em!! but top gear ratio is still the same
 to fit a toyota 4 or 5 spd would be fairly costly          so  i suggest ya leave it as it is unless you need to replace it for mechanical reasons
          cheers trev
« Last Edit: February 22, 2004, 02:03:00 PM by robbzfc58 » Logged

robbzfc58
RIP Trevor Robb: a good mate to all on the FE-FC Forum
nicko
Guru
*****
Offline Offline

Posts: 1178


I love YaBB 1G - SP1!


View Profile
« Reply #2 on: February 22, 2004, 12:58:41 PM »
0

why not change to a taller diff ratio,that way you dont need any mods
Logged

oldgmh
Junior Member
**
Offline Offline

Posts: 92


I love YaBB 1G - SP1!


View Profile
« Reply #3 on: February 22, 2004, 11:31:02 PM »
0

The standard ratio is 3.89.  
You could try a 3.55 or a 3.36 from later models.  
They will fit into the existing diff housing okay but the standard grey might not have enough grunt - depends on your driving requirements.
Logged
RET
Administrator
Guru
*****
Offline Offline

Model: FE
Posts: 5783



richard.e.thomas ret56fe
View Profile WWW
« Reply #4 on: February 24, 2004, 06:57:13 AM »
0

An otherwise stock grey runs great with a 3.55 diff.  I know blokes who have run a grey with a 3.36 but personally I think that's going a bit too far.

cheers
RET

Logged

OurCarClub.com.au is a web-based data management application, custom built for car clubs and their volunteer officials. More info...
EJ_Dave
Full Member
***
Offline Offline

Posts: 148



View Profile
« Reply #5 on: February 25, 2004, 02:41:34 AM »
0

I have run both 3.36 and 3.55s behing my stock grey and I'd agree with RET that the 3.55 is the best option. 3.36 is just a little bit too tall down low and at cruising speeds you don't really notice the difference.

David
Logged
EJ_Dave
Full Member
***
Offline Offline

Posts: 148



View Profile
« Reply #6 on: February 25, 2004, 02:46:50 AM »
0

Forgot to mention that I started with a 3.89.

Some useful numbers to consider. 3.55 is 10% taller than 3.89, 3.36 is 15%. This extra 5% is just pushing it over the edge- you always need to work to get the car up to speed. You don't feel this with 3.55 but you can hang on to 1st for longer. With the 3.89 I always felt that you'd  only just be rolling and you'd have to change up.

David
Logged
Nick Athans
Guest
« Reply #7 on: February 25, 2004, 11:05:33 PM »
0

thanks heaps guys..i was never interested in cars untill i bought my FC last month..now between the manual and work mates ive learnt heaps....much appreciated...Nick.A
Logged
Pages: [1]   Go Up
  Add bookmark  |  Print  

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.039 seconds with 20 queries.