FE-FC Holden Discussion Forum
November 17, 2024, 03:52:49 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.
 
   Home   Help Search Calendar Login Register  
FE-FC Holden Discussion Forum > General > General Board (Moderators: RET, Glenn 'Stinky' Stankevicius) > FC front door top hinge "springs"
Pages: [1]   Go Down
« previous next »
  Add bookmark  |  Print  
Author Topic: FC front door top hinge "springs"  (Read 1370 times)
Greg McNamara
Guest
« on: January 08, 2001, 01:00:00 PM »
0
The top hinge of my FC front doors has a "spring" rivetted in place to keep the door in the open position. They are fatigued (one broken off, the other about to). Is it possible to get these somewhere and replace them on the hinges?
Greg
(gecko@netspeed.com.au)
Logged
Ken McLean
Guest
« Reply #1 on: January 13, 2001, 01:00:00 PM »
0
Yes,  get passenger door hinges from a wreck, remove the springs by drilling out the rivets, then reinstall the good springs on your hinges using new rivets or small bolts.  Check the brass bushes & hinge pins for wear while you have the hinges out as well.  These items are the usual culprits for door sag.  They can best be replaced using the bushes and pins from rear door hinges since they are the same.   Ken
Logged
Pages: [1]   Go Up
  Add bookmark  |  Print  
« previous next »

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.03 seconds with 17 queries.