FE-FC Holden Discussion Forum
August 02, 2021, 09:43:42 PM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: The FE-FC Holden Car Club of NSW are proud to host the 19th FE-FC Holden Nationals. Check out the announcement video for more.
 
   Home   Help Search Calendar Login Register  
Pages: [1]   Go Down
  Add bookmark  |  Print  
Author Topic: Distributor location  (Read 91 times)
Ronno
Junior Member
**
Offline Offline

Posts: 28


View Profile
« on: July 17, 2021, 06:39:54 PM »
0

I installed a distributor on an original grey today, but the vacuum advance seems a little too close to the steering colum linkages. Could anyone tell me where I can find some images of the original positioning of the distributor? Cheers
Logged
mcl1959
vic-club
Guru
*****
Offline Offline

Posts: 6072


FE's rule


View Profile
« Reply #1 on: July 17, 2021, 07:30:57 PM »
0

Advance should point almost directly towards the front of the car.
Installation as follows
Locate no 1 piston at TDC on power stroke ( take off rocker cover to check power stroke on no 1)
There is a small notch on the rim of the distributor which when installed should line up with the rotor button.
You need to align the oil pump drive so that when the distributor is installed it rotes slightly and goes into the oil pump drive and you end up with the rotor button aligned with the notch on the distributor drive

Ken
Logged
my8thholden
nsw-club
Senior Member
****
Offline Offline

Model: FC
Posts: 638



View Profile
« Reply #2 on: July 17, 2021, 07:41:53 PM »
0

Ronno ..see my post of 7th Feb 2021 in technical sect under " getting the grey to run " .. i suspect you are rotating the dissy to engage with the oil pump drive where it is sitting, its other way round you position the oil pump drive to suit the dissy , you will have to put a screwdriver down the dissy hole and rotate the oil pump drive ,then follow those steps ..good luck ..keep well Vern
Logged

these days i'm half as good for twice as long
Pages: [1]   Go Up
  Add bookmark  |  Print  

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.044 seconds with 19 queries.