seat mounting bracket spacers

[Roybeth]

Hi All

I've read some posts and am still unclear as to if the seat mounting bracket spacers came with the cars originally or were they something put in later - and what they are actually for.

TIA

[Errol62]

Originally an accessory to adjust the seat height. Became universally popular and by EK were virtually standard dealer upgrade.


Sent from my iPad using Tapatalk

[Roybeth]

Thanks - just wasn't sure if I needed them - though I will see once the seat is back in and I start driving her if I will need the seat raised or not. 

[my8thholden]

Helen ..The seat spacers in my car were plastic and all crumbled on removal , got an aluminum set from Pete Mallaby member on this forum ,fitted quite well.he makes several items for 48 to 68 Holdens ...cheers Vern .

[Maco]

Pete Mallaby makes a great set of the spacers.

[zulu]

In our pano I used the fronts but left the back ones out as it gives the seat a bit of lay back

[zulu]

In the earlier FE's they were made from wood, which we're a little sturdier than the plastic

[DJ]

I used a crumbling plastic one as a template to make some from a poly??? bread board. I needed a couple of layers glued together to make up the height so stacked 8 pieces, drilled & bolted them together before cutting out to shape. It was a little time consuming but worth the effort I thought. Had they been available from Pete back them I may have opted to save myself the time. His products are very good.

[Ken's 57]

My FE had its original wood spacers that had split. The aluminium ones I purchased from Pete were great. Installed without any issues. Recommend!
Cheers, Ken 

[Errol62]

Yes I have a set of black Polly ones from Pete as well. I was going to use just the front ones in my FB ute, but when I trial fitted, found that the seat would only slide back to the third last hole due to touching the parcel shelf.


Sent from my iPad using Tapatalk