FE-FC Holden Discussion Forum
November 22, 2024, 09:36:11 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: The FE-FC Holden Car Club of NSW are proud to host the 19th FE-FC Holden Nationals. Check out the announcement video for more.
 
   Home   Help Search Calendar Login Register  
FE-FC Holden Discussion Forum > Technical Board > Modification Help (Moderators: RET, Glenn 'Stinky' Stankevicius, gp) > Fc front springs
Pages: [1]   Go Down
« previous next »
  Add bookmark  |  Print  
Author Topic: Fc front springs  (Read 6426 times)
fcute
Junior Member
**
Offline Offline

Model: FC
Posts: 58



View Profile
« on: November 25, 2019, 02:26:05 AM »
0
Has anyone fitted FC front springs in a HR front end.

Thanks
Logged
Errol62
Guru
*****
Offline Offline

Posts: 1189


View Profile
« Reply #1 on: November 25, 2019, 07:41:13 AM »
0
Not me however they are the same



Sent from my SM-A705YN using Tapatalk
Logged
fcwrangler
nsw-club
Guru
*****
Offline Offline

Model: FC
Posts: 1258


JIM-- Gilead NSW


Jim Tuckwell
View Profile
« Reply #2 on: November 25, 2019, 10:57:29 AM »
0
I think you’ll find the FC springs are smaller in overall circumference, they would tend to move around.
Logged
on the seventh day: God Made Holden
Harv
Guru
*****
Offline Offline

Model: other Holden
Posts: 1343


View Profile
« Reply #3 on: November 25, 2019, 02:48:05 PM »
0
Suspect they are different... King Springs quotes different part numbers for FE/FC (KHFS-21) and HR (KHFS-01).

Cheers,
Harv
Logged
hsv-001
Senior Member
****
Offline Offline

Posts: 909


View Profile
« Reply #4 on: November 25, 2019, 03:15:00 PM »
0
Different .
Logged
Errol62
Guru
*****
Offline Offline

Posts: 1189


View Profile
« Reply #5 on: November 26, 2019, 08:21:42 PM »
0
My mistake
FE FC are the same part.
FB to EH share the same part.
HD kingpin is different.
HD kingpin heavy duty same as HD ball joint standard spring.
HR different part number.

I'm pretty sure HR spring will fit FB. The after marked HR springs I have are 5" or 126mm outside coil diameter. My FB springs look to be the same 5" o/d.

Sent from my SM-A705YN using Tapatalk
Logged
mcl1959
vic-club
Guru
*****
Offline Offline

Posts: 6155


FE's rule


View Profile
« Reply #6 on: November 26, 2019, 08:57:56 PM »
0
There is some more interesting info re FE FC front springs.
Sedan springs (7408860) are lighter rating than wagon, van, Ute springs (7410727). So you can beef up the sedan front suspension a bit by fitting wagon, van or Ute springs.
Same with FB EK and EJ

Ken
Logged
my8thholden
nsw-club
Senior Member
****
Offline Offline

Model: FC
Posts: 836



View Profile
« Reply #7 on: November 27, 2019, 07:12:11 AM »
0
First you have to identify which is which ,did they have a part number stamped on them Ken ? I don't think they were colour coded for warehousing and stock picking , also fellas if you are looking for new ones ,the only ones I could find are King Springs which I bought and they have one size fits all as Harv has mentioned ,I feel in my sedan they are quite firm ...Vern ..
Logged
these days i'm half as good for twice as long
zulu
nsw-club
Guru
*****
Offline Offline

Model: FE and FC
Posts: 1863


Old Boonah Ambo


View Profile
« Reply #8 on: November 27, 2019, 01:16:28 PM »
0
The part no on front springs is stamped on the flat end or upper end of the coil

Following from what Ken said re swapping the fronts for more strength you can also swap the rear leaf spring assemblies to beef up sedans
Logged
Pages: [1]   Go Up
  Add bookmark  |  Print  
« previous next »

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.032 seconds with 20 queries.