Seatbelt

[xwolfkvltx]

Hi Guys, what does everybody usually do with seatbelts in fc's, has to be able to pass engineer inspection. Thanks in advance

[NES304]

My engineer wants a unf nut welded to a 3mm plate 75mm x 45mm. Larger if two points going to it (100mm x 100mm) and then stitch welded or plug welded to the body.

Check with YOUR engineer first. Some interpret the rules differently.

Here's the big one

[NES304]

There may be an easier way to slip em into the pillar though...
Some guru here might put some good guts info up