FE-FC Holden Discussion Forum
November 28, 2024, 12:59:21 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.
 
   Home   Help Search Calendar Login Register  
Pages: [1]   Go Down
  Add bookmark  |  Print  
Author Topic: Aluminium Radiators  (Read 6558 times)
CoolFCWgn
Junior Member
**
Offline Offline

Model: FC
Posts: 68



View Profile
« on: June 25, 2014, 09:57:39 PM »
0


Any reports on the aluminium radiators for around $200 on e-bay ? Are they any good?

I just want to replace one on my stock FC.


http://www.ebay.com.au/itm/3-CORE-HOLDEN-FJ-FX-48-49-50-51-52-53-54-55-ALUMINUM-ALLOY-RADIATOR-BRAND-NEW-/261462298622?_trksid=p2054897.l5662#ht_5725wt_1004

Ian.
Logged
Airfireman
Junior Member
**
Offline Offline

Model: something else...
Posts: 72


View Profile
« Reply #1 on: May 10, 2016, 09:01:58 AM »
0

Gday Ian

Did you purchase this Radiator?Huh??

If so can you recommend??

Thanks

Tim
Logged
Trevor_B
vic-club
Senior Member
****
Offline Offline

Model: FC
Posts: 377


Melbourne VIC


View Profile
« Reply #2 on: May 10, 2016, 09:26:36 AM »
0

Hi Tim,
I purchased one of these (can't tell if exactly the same as link now does not work).

It was certainly not  the same as the original radiator and presented significant difficulties in attempting to fit it into an FC.

I first tried it in our ute, due to the extra thickness it had less than 5mm from the fan and the top and bottom tanks fouled. The mounting holes were also out of place.

When I tried it in our sedan there was a little more clearance to the fan but only just enough... Same problem with fouling and mounting brackets. After some subtle modifications I have installed it in the sedan but certainly not happy with the result. Will stay until I can get an original one re-cored.

My advice would be to buy one only as a last resort and be prepared for challenges  Sad

The Ebay vendor was prepared to take it back based on no damage and original packaging which is a bit hard as mine was vacuum plastic packed and of course as soon as you try to slide it into place you touch the fins against the radiator and so it looks damaged.

Cheers,
Trevor_B
Logged

FC Sedan, Ute & Wagon .... only a Panel Van required to make the set
Airfireman
Junior Member
**
Offline Offline

Model: something else...
Posts: 72


View Profile
« Reply #3 on: May 10, 2016, 10:39:21 AM »
0

Gday Trevor,

Thanks for the info,

I was deciding whether to re-core the original Rad or purchase new.

I never clicked the buy it now cheap ebay radiator as I suspected cheap will lead to problems.

Appreciated

Tim

 
Logged
ACT59FC
act-club
Full Member
***
Offline Offline

Model: FC
Posts: 130



View Profile WWW
« Reply #4 on: May 17, 2016, 06:57:59 PM »
0

I just had my fuel tank repaired in a radiator shop. Whilst there I asked the exact same question. The guy told me that numerous people purchasing these alloy radiators have taken them back out and reinstalled the original. He said the Alloy ones in his experience don't cool as efficiently as the original and advised me to stick with the brass and copper.




Regards Rod.
Logged

FC the Marilyn Monroe of Holdens. All the curves in exactly the right places!
FC Dave
Full Member
***
Offline Offline

Model: FC
Posts: 220



View Profile
« Reply #5 on: May 22, 2016, 08:18:46 PM »
0

I dont know if this applies to older cars, but we had a Aluminium Radiator fail on a VN calais due to water in the tail lights causing a crook earth & stray current.
Radiator bloke says it will attack rads & welsh plugs. Just something to be aware of maybe.
Logged
FCRB26
Guru
*****
Offline Offline

Model: FE and FC
Posts: 3802


peter.mallaby
View Profile
« Reply #6 on: May 23, 2016, 06:49:09 AM »
0

When i bought my PWR radiator it says to get a multimeter and put it into the coolant to make sure thee is no curent whatsoever.

http://www.pwr.com.au/wp-content/uploads/PWR-Notice-to-Owners.pdf


Logged

Pages: [1]   Go Up
  Add bookmark  |  Print  

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.03 seconds with 19 queries.