FE-FC Holden Discussion Forum
November 27, 2024, 08:56:44 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: The FE-FC Holden Car Club of NSW are proud to host the 19th FE-FC Holden Nationals. Check out the announcement video for more.
 
   Home   Help Search Calendar Login Register  
Pages: [1]   Go Down
  Add bookmark  |  Print  
Author Topic: Fuel tank for V6 conversion  (Read 2505 times)
Greg Pooley
Guest
« on: June 10, 2003, 09:23:19 AM »
0

 Cool
Any simple solutions to cater for unleaded and internal fuel pump that were in the VP donor car? Obviously the FC standard tank has neither. Options include modifying FC tank, VP tank or Huh.

Cheers
Logged
HARKO
Guest
« Reply #1 on: June 10, 2003, 09:52:12 AM »
0

I dare say that the Rego authorities will want a smaller outlet that only suits unleaded Greg
A couple of members on the board have and/or are going through the process, Heres the links

http://www.fefcholden.org.au/cgi-bin/yabb/YaBB.cgi?board=album;action=display;num=1052494452;start=0

http://www.fefcholden.org.au/cgi-bin/yabb/YaBB.cgi?board=album;action=display;num=1016354011;start=0

see what they have done and if you have any questions Im sure they wont mind giving you some tips, Cheers
Logged
Ed
Guru
*****
Offline Offline

Model: FE
Posts: 3311



Ed74mnd
View Profile
« Reply #2 on: June 10, 2003, 08:39:00 PM »
0

Hey Greg,

Jason has used the internal pump and custom tank in his van to great effect.

I have a wagon and am using an external lift pump (Carter) compact unit.  Unless you really must have an internal pump, this is also a viable option.  Are you planning to run EFI or carby, as this will also dictate your decision here.  Surge tanks etc can be mounted externally also, however the commodore tank would probably be suitably baffled already for EFI.

I didnt mod my filler to unleaded nozzle size.  I don't think it is a requirement in NSW, since the motor I am using wasn't originally designed to run on ULP..  incidentally it is now ULP with later model heads.

Since I have fitted up a Commodore fuel flap, it wouldnt be much hassle to changeover to ULP filler if required.

I think "sgo" has gone the entire fuel tank, filler route from a commodore.. also with great effect.

Hope this Helps

Cheers

Ed


Logged

in the shed
JB
qld-club
Guru
*****
Offline Offline

Model: FE
Posts: 1914



Jason Blanchard
View Profile
« Reply #3 on: June 10, 2003, 10:13:49 PM »
0

Hi Greg,

I chose to make a tank for my Van out of aluminium so that I could have a bigger capacity (90 litres) and also use the internal fuel pump from the Vt donor car... This also has the surge pot incorporated with it.

Not a quick exercise but I am happy with the end result. I bought and folded the alloy and then had someone weld it up for me.

There are a couple of photo's under "My Van"

Cheers
Jason.
Logged

Phone +64 223509263
Greg Pooley
Guest
« Reply #4 on: June 15, 2003, 10:17:46 PM »
0

 ;)Thanks Guys, Some great ideas and examples!
Logged
Pages: [1]   Go Up
  Add bookmark  |  Print  

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.035 seconds with 20 queries.