FE-FC Holden Discussion Forum
November 17, 2024, 02:52:16 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.
 
   Home   Help Search Calendar Login Register  
Pages: [1]   Go Down
  Add bookmark  |  Print  
Author Topic: Mounting fender Mirrors  (Read 5376 times)
FC0058
qld-club
Guru
*****
Offline Offline

Model: FC
Posts: 2128



Jim Altmann
View Profile
« on: March 30, 2012, 03:59:06 PM »
0

Hi All

Hopefully some one can answer this question before I start drilling holes in my front guards.

I have a set of WIBROC fender mirrors, I have searched the site looking for instruction / measurements for fender placement. Alex has various mirrors in the accessories thread all the mounting plates are similar or the same as mine but there are no instructions.

Do I mount them in the middle, centre top of guard or as far forward as I can at the end of the peak line were it flattens out ? Would like to mount them before departing for the Nat's, I drive my car almost daily so no side mirrors has become a little bit of a hazard since moving to Adelaide.

Cheers Jim 
Logged

Forgiveness is easier than permission.
mcl1959
vic-club
Guru
*****
Offline Offline

Posts: 6155


FE's rule


View Profile
« Reply #1 on: March 30, 2012, 05:41:23 PM »
0

Yep you've got it pretty much right - on the centre line just after it flattens out - depending on your height you may have to move them forward a little bit.

Ken
Logged
Not Happy Jan
nsw-club
Senior Member
****
Offline Offline

Model: FC
Posts: 956


Aussie adventure


View Profile
« Reply #2 on: March 30, 2012, 09:49:08 PM »
0

Hey Jim
Could you post a photo of the mirrors once they are mounted.
Ta Nick
Logged

You can never have too many!
Port Macquarie NSW
FC0058
qld-club
Guru
*****
Offline Offline

Model: FC
Posts: 2128



Jim Altmann
View Profile
« Reply #3 on: March 30, 2012, 09:59:40 PM »
0

Thanks Ken, I thought to myself if anyone answers in quicktime it will be Ken.

Nick once I have measured, marked, measured again and just to be sure I will tape in spot, then I will drill and fit. Must say am a little nervous that I will get it wrong and have 2 hole in each guard. Hmmmm must bit the bullet and just do it.

Ok I am off the the garage to test fit. Whatch this space.

Cheers Jim
Logged

Forgiveness is easier than permission.
FC0058
qld-club
Guru
*****
Offline Offline

Model: FC
Posts: 2128



Jim Altmann
View Profile
« Reply #4 on: March 30, 2012, 11:42:50 PM »
0

Ok

I have measured marked, re-measured, asked she who must be obeyed, on advise from the boss we moved them forward. They now sit 2/3 of the way down the guard.

Sitting in the driverside they are both easy to see and dont seem to be to far away. Having some issues under the fluro finding centre so do not plan on final mounting untill I get some natural light in the morning.

Thoughts ?



Cheers Jim
Logged

Forgiveness is easier than permission.
Not Happy Jan
nsw-club
Senior Member
****
Offline Offline

Model: FC
Posts: 956


Aussie adventure


View Profile
« Reply #5 on: March 31, 2012, 10:59:03 PM »
0

Yeah that looks good    Smiley Smiley. About the same position as my mirrors... but yours are much nicer!!!
Nick
Logged

You can never have too many!
Port Macquarie NSW
mcl1959
vic-club
Guru
*****
Offline Offline

Posts: 6155


FE's rule


View Profile
« Reply #6 on: April 01, 2012, 09:19:50 AM »
0

I would suggest just a little further forward - have a look at Alex's feature article number 46 - it is a 1959 article showing an FC fitted with guard mirrors.

Ken
Logged
Stash
nsw-club
Senior Member
****
Offline Offline

Model: FC
Posts: 337


Sydney, NSW


johnchaplin
View Profile
« Reply #7 on: April 01, 2012, 03:19:26 PM »
0

looking good Jim.
Have you taped the roof ready for a tennis cap (visor)?
Logged
Pages: [1]   Go Up
  Add bookmark  |  Print  

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.035 seconds with 20 queries.