Grey Motor Harmonic balancer removal tool thread size?

[captainkickback]

Could anyone give me the thread size of the male thread that screws into the pulley?
My Dad lives up the Central Coast and is overhauling a friends grey motor and doesn't want to buy one for a "one off" job. I  can machine one up at work if i have the dimensions.
Any help will be appreciated.

[Rusty_T]

Captian kickback,

email sent.

Cheers Rusty

[captainkickback]

Thanks Rusty.

[Maco]

I can check the thread size tonight if that helps.

Cheers
John

[captainkickback]

I can check the thread size tonight if that helps.

Cheers
John

That would be great.
Thanks John.

[Maco]

Hi CKB,

I have measured my removal tool and it measures 1.120" Diameter x 12 TPI. (1.1/8" 12 UNF)

Hope this helps.

John

[captainkickback]

Hi CKB,

I have measured my removal tool and it measures 1.120" Diameter x 12 TPI. (1.1/8" 12 UNF)

Hope this helps.

John

That's Great.
Thanks to John and everyone who helped with this info.

Cheers,
Jamie.

[Rusty_T]

Jamie ,

Just so you know what they look like Here are a couple of pics


This one you knock it on with.



This one is used to remove it. This comes in 2 parts.




Jamie they say a picture is worth a thousand words. I hope these help.

Cheers rusty

[captainkickback]

Thanks Rusty,
It looks like i'm heading to the workshop to knock a couple of these bad boys up right now...

Cheers.

[Maco]

Jamie,

I have sent you an email.

Cheers
John

[ekute]

Hey captain can you knock one up for me also?

[Old_Mt_Isa_Boy]

Ebay Item #250705268553

Very topical.

Rgds Wayne

[FE 4 ME]

Hey There Captain,
                            have you made a few of these ( or making more ) ? if so do you still have one you would like to send my way ?

cheers

Have a Gr8 Holden ( FE ) Day !! 

FE 4 ME

[FE 4 ME]

Oh !!  P.S. will it suit a holden red motor ?

thankx

FE 4 ME

[collecta]

No. red motor uses a different type of puller.
cheers
Scott

[FE 4 ME]

Thankx Scott,
   i did notice that there is no thread or bolt to lock onto to pull the harmonic , rotate the motor for tuning or just turning the motor to pump the oil around

ive realise the starter motor on short squirts is the only way to go, ive got to upgrade to electronic dizzy, so getting number 1 piston up will be fun

so how do you take a red motor harmonic off ? what does that puller look like ? and is there another way to crank the motor over beside short hits on the starter motor ?

any ideas my Holden Mates ??

"Have a Great Holden ( FE ) Day !!"   

FE 4 ME