FE-FC Holden Discussion Forum
November 30, 2024, 01:20:42 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.
 
   Home   Help Search Calendar Login Register  
FE-FC Holden Discussion Forum > Technical Board > Restoration Help (Moderators: RET, Glenn 'Stinky' Stankevicius, gp) > 2 door wagon
Pages: [1]   Go Down
« previous next »
  Add bookmark  |  Print  
Author Topic: 2 door wagon  (Read 5168 times)
stevenp
Newbie
*
Offline Offline

Posts: 3


View Profile
« on: June 20, 2010, 07:12:58 PM »
0
Hi im a member of the fbek forum,  myself and a mate have just picked up a 2 door fc wagon with windows all around, can anyone tell us a bit about these wagons. thanks steve
Logged
FCRB26
Guru
*****
Offline Offline

Model: FE and FC
Posts: 3802


peter.mallaby
View Profile
« Reply #1 on: June 20, 2010, 07:36:18 PM »
0
Panel van with windows all around im guessing.

Any pics
Logged
http://www.mallaby.com.au
FC427
nsw-club
Guru
*****
Offline Offline

Model: FC
Posts: 2457


I love YaBB 1G - SP1!


View Profile
« Reply #2 on: June 20, 2010, 07:41:22 PM »
0
A Vanette
Logged
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride
stevenp
Newbie
*
Offline Offline

Posts: 3


View Profile
« Reply #3 on: June 20, 2010, 07:53:46 PM »
0
Quote from: fchoon on June 20, 2010, 07:36:18 PM
Panel van with windows all around im guessing.

Any pics
havent taken any pics yet will try and get some this week
Logged
stevenp
Newbie
*
Offline Offline

Posts: 3


View Profile
« Reply #4 on: June 20, 2010, 07:55:04 PM »
0
Quote from: FC427 on June 20, 2010, 07:41:22 PM
A Vanette
whats the difference between a vanette and a panel van
Logged
zulu
nsw-club
Guru
*****
Offline Offline

Model: FE and FC
Posts: 1863


Old Boonah Ambo


View Profile
« Reply #5 on: June 20, 2010, 08:54:12 PM »
0
It's basically a panel van that has had windows cut into the sides, This was done by various companies, in NSW Canopy Industries, in Victoria it was Baileys Motor Body Builders.

As well as side glass it was also possible to add rear seats & even a rear side door, for less dosh than buying a wagon

A lot of vans have had the glass treatment, so much so that I think they would out number original all metal side vans, some have removed the glass & reinstalled the metal sides.

   
Logged
zulu
nsw-club
Guru
*****
Offline Offline

Model: FE and FC
Posts: 1863


Old Boonah Ambo


View Profile
« Reply #6 on: June 21, 2010, 08:58:29 PM »
0
Mc Bean has sent a pic of a  Cool 2 door wagon with a folding Canopie Industries rear seat, note the round bar or pipe supports between the windows



Tell us more Andy, is it an FE or FC
Logged
Brad
Senior Member
****
Offline Offline

Model: FC
Posts: 308


My FC Van in 1986 and I still have It


View Profile
« Reply #7 on: June 26, 2010, 12:48:12 AM »
0
Is the fold back and up seat as per the above pic  rare or are they fairly common with this type of modification ? My van has one but I have never seen any like it before. The van has two doors  and full windows . Wagon windows at the back and "Denning" sliding windows between the B and C pillars where the rear doors would be on a wagon . I think it was a windowless van from the factory but I'm not sure.
   Brad.
Logged
Id rather have a full bottle in front of me than a full frontal labotomy
Mc Bean
Full Member
***
Offline Offline

Posts: 176



View Profile
« Reply #8 on: June 26, 2010, 01:22:42 PM »
0
Hi All

It is an FC van, which I am lovenly rebuilding with the help of you guys for a good friend of mine.

Andy
Logged
Andy
mcl1959
vic-club
Guru
*****
Offline Offline

Posts: 6155


FE's rule


View Profile
« Reply #9 on: June 26, 2010, 10:03:56 PM »
0
Most vans left the factory with rear glass in the tailgate (option 333) on the ID plate, They all had no windows in the sides.
GMH dealerships had close ties with body builders in the 50's and they would arrange for your new van to have windows fitted to suit your needs on purchase.
So even though the van had no windows when built, it would have side glass fitted to your order when you picked it up.
The rear seat fitment is quite rare.

Ken
Logged
Pages: [1]   Go Up
  Add bookmark  |  Print  
« previous next »

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.048 seconds with 20 queries.