mounting hr crossmember

[gwuthie]

I assume this is simple... but. When mounting the hr xmember to FC frame, which rubbers should I use as the tit bit where the bolts come thru are different.

[FC427]

Rares makes the rubber mounting kit for mounting the HR crossmember to FC it has the correct rubbers needed.......FC427........

[FB_MAD]

You need Rare Spares kit

"Front End kit, front end mounting rubber FE-EK with HR Xmember"

Part number FEK4A

[JB]

Do they do this kit in Noelathane??

JB

[FC427]

They make the outrigger bush don't know about the rest  ...FC427.....

[Rusty_T]

Hi all,

What bits are in the kit?

Rusty

[mcl1959]

In the past I've used the following mix of parts;
HR bolts, nuts, spring washers and the 4 longer FC spacers.
The HR doughnut which goes between the subframe and the crossmember.
The FC upper rubber and metal retainer.

But the kit makes it all a lot easier.

Ken

[fc2360]

fulrom suspensions in their super pro bushes (urathane material) do a fc to hr front end conversion kit . reguards fc2360

[hrpremier]

Put this kit into my HR Front end about 4 weeks ago.  As for as rubber kits go very happy.  A picture of the contents of the kit can be found under the FC folder in my shed at the attached link..............  4 upper cross member bushes, 4 lower cross member bushes and a Outrigger  Rubber to go in the mount below the radiator.  $50 odd dollars from memory.

Bought the kit through Auto1 (Rare Spares Outlet)

http://gallery.oldholden.com/hrpremier/

[ratbox]

don't buy the kit from spectrum rubber st marys ex peter jacksons, $50 odd from rares well over $100 from spectrum
kit contains 4 upper rubbers 4 lower rubbers and outrigger rubber