FE-FC Holden Discussion Forum
November 25, 2024, 11:00:21 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.
 
   Home   Help Search Calendar Login Register  
FE-FC Holden Discussion Forum > Technical Board > General Technical (Moderators: RET, Glenn 'Stinky' Stankevicius, gp) > clutch plate
Pages: [1]   Go Down
« previous next »
  Add bookmark  |  Print  
Author Topic: clutch plate  (Read 2228 times)
59 me
Junior Member
**
Offline Offline

Posts: 28


View Profile
« on: July 01, 2009, 04:10:32 PM »
0
hi,was just hoping if anyone could help me with my new clutch install.My question is which way does the clutch plate go,hub to flywheel or hub to pressure plate,there is no indication printed on the plate and the manual says to flywheel,however the local transmission mechanic says to the pressure plate...thanks for reading mike
Logged
FC427
nsw-club
Guru
*****
Offline Offline

Model: FC
Posts: 2457


I love YaBB 1G - SP1!


View Profile
« Reply #1 on: July 01, 2009, 07:18:09 PM »
0
IF you offer it to the flywheel hold it flat on the flywheel by hand  and turn it   it will only turn on one side the other side will bind on the springs one the flywheel .......FC427......
Logged
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride
Pages: [1]   Go Up
  Add bookmark  |  Print  
« previous next »

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.033 seconds with 19 queries.