HR steering gear ???

[Glenn 'Stinky' Stankevicius]

I bought a HR steering setup to fit to the FE and was going to start stripping and rebuilding it when I purchased a complete HR front-end and motor. I noticed that the two sets of steering gear are different, where there two different types?

Here's the one I bought separate, two tie-rod ends on an adjuster tube, where as the other unit looks more like an FE/FC setup  .

[Bob_FC_Ute]

The connecting rod off the HR steering sits about 8 inches away from the back of the cross member with the wheels pointed straight ahead. I believe the steering from the earlier holdens sits in closer to the cross member. This necessitates the use of the EH sump on Red motors into early holdens as the lowest part of the sump, where the oil pick occurs, is at the back of the motor. On the HR the pick up is more towards the middle of the motor.
Hope this helps Bob

[Glenn 'Stinky' Stankevicius]

Thanks Bob, I have the EH sump fitted, I am just a bit puzzled over the steering gear itself.
Below is an extract from the HR manual which shows the tie-rod at the end of the steering gear, which looks like the "spare" front-end I have, but not like the gear I was going to fit up.
The gear I have seems to have a tie-rod at each end with a long threaded tube in between, I just don't want to fix it up to find I have the wrong gear.

[ratbox]

mine's as in the book drawings and that's what i always remember them to loo like, sorry i can't help further

[mcl1959]

Stinky the one you bought is HK T G  - hope you didn't pay too much for it.

Ken

[Glenn 'Stinky' Stankevicius]

Thanks guys, it was 2 years ago when I got them but I am sure I got a good deal as it was through the forum 
Anyone want to buy it? 

PS: Wanted - HR Steering gear set.

[FC427]

Stinky you should be able to buy most of it new  not genuine  GMH ask your spare parts man ........FC427.......

[FC427]

Stinky  ebay item number 330309990235  ......FC427.........

[Glenn 'Stinky' Stankevicius]

Stinky  ebay item number 330309990235  ......FC427.........

Thanks FC427.