FE-FC Holden Discussion Forum
November 28, 2024, 08:37:39 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.
 
   Home   Help Search Calendar Login Register  
Pages: [1]   Go Down
  Add bookmark  |  Print  
Author Topic: generator light is on  (Read 3311 times)
freddyc
qld-club
Senior Member
****
Offline Offline

Model: FC
Posts: 637



View Profile
« on: October 10, 2008, 10:10:29 PM »
0

 my gen light is staying on, and amp gauge is showing no power produced. Changed gen and still the same, could it be the regulator? or something else?
Logged

Townsville North Queensland
FCGos
Full Member
***
Offline Offline

Posts: 127


View Profile
« Reply #1 on: October 10, 2008, 10:49:54 PM »
0

Yes it could be the regulator but first check the wiring (the smaller ones) back to the battery and starter motor for any breaks or bad conections and also those to the regulator. A multimeter will help to determine if the circuit is sound or not, just set it on the OHM range to see if there  is any resistance. Alternatively you can bypass the regulator to see if the light goes off but this is not a fix only a diagnostic.  Also check simple things like the engine and body earths etc. Hope this helps cheers Wayne
Logged
freddyc
qld-club
Senior Member
****
Offline Offline

Model: FC
Posts: 637



View Profile
« Reply #2 on: October 14, 2008, 09:47:11 PM »
0

The problem was in the regulator box, fixed it on saturday came on again tonight (tuesday). Anyone got any ideas on what the problem could be, before I go to auto lec. regards
Logged

Townsville North Queensland
mcl1959
vic-club
Guru
*****
Offline Offline

Posts: 6155


FE's rule


View Profile
« Reply #3 on: October 15, 2008, 08:52:38 PM »
0

What did you fix in the reg?  Did you try a different reg?

Maybe your reg is faulty

Ken
Logged
KFH
qld-club
Senior Member
****
Offline Offline

Model: FC
Posts: 683



View Profile
« Reply #4 on: October 16, 2008, 05:59:16 PM »
0

Maybe try cleaning the relay contacts in the regulator with some 320 grip paper ,or points file,but be careful not to alter the gap. I had this problem in one of my regulators.

Keith
Logged

I was born with nothing and still have most of it left
old-blu
nsw-club
Senior Member
****
Offline Offline

Model: FE and FC
Posts: 566


I love YaBB 1G - SP1!


View Profile
« Reply #5 on: October 17, 2008, 12:50:44 PM »
0

Have you checked the tension of the fan belt?  old-blu.
Logged

6th, may 1958 "I was there".
freddyc
qld-club
Senior Member
****
Offline Offline

Model: FC
Posts: 637



View Profile
« Reply #6 on: October 17, 2008, 07:46:13 PM »
0

thanks for suggestions fitted alternator, there goes originality, still looks original.
thanks again everyone
Logged

Townsville North Queensland
Pages: [1]   Go Up
  Add bookmark  |  Print  

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.027 seconds with 19 queries.