Rear Springs rubber holders

[FATBOY]

Wanted the pieces of metal that hold the rubber insulater that have the u bolt run up each side on the rear leaf springs

regards fatboy
starting the preliminary fit up of the ute before painting

[FC427]

Hi Fatboy I don't run them or the rubber insulator I bolt it all together like HQ\WB Ute's Vans and 1Toner's and that lets it all pull up hard and the U bolts don't need to checked periodically as the rubber deteriorates and squashes.Just a thought.......FC427.........

[FATBOY]

Thanks for the reply mark
regards fatboy

[Harley]

FC427 I'm not seen HQ\WB Ute's Vans set up but how do they bolt up, do they not use rubbr insulaters,

[FC427]

Harley the diff sits straight on the spring if you were doing this it would require a bush to locate the diff housing on the centre bolt [I made new saddles when I fitted the Commodore diff with the location hole to suit the centre bolt size ]and then just pull the U bolts up .....FC427........