FE-FC Holden Discussion Forum
November 27, 2024, 07:39:53 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.
 
   Home   Help Search Calendar Login Register  
Pages: [1]   Go Down
  Add bookmark  |  Print  
Author Topic: FC Oil filter.  (Read 3950 times)
Lincoln Lee
Guest
« on: October 22, 2002, 09:44:30 AM »
0

Hi,
Wanted to know if any one has any info on the after market oil filters.I have got one which I fitted to my motor but when I went to fit the motor into the body it hit against the steering box.I presume this filter is for a earlier model.Can any one show me some photo,s or let me know if there was several diferent filter housings.Thanks,Regards Lincoln.
Logged
mcl1959
vic-club
Guru
*****
Offline Offline

Posts: 6155


FE's rule


View Profile
« Reply #1 on: October 22, 2002, 10:14:09 AM »
0

Lincoln Lee, the correct FC oil filter screws to the side plate screws.  2 at the top and 1 at the bottom.  It goes towards the front of the engine, clear of the steering box.
What state r u in.  I'm sure meeting up with some of the guys in a local FE/FC club would be beneficial.

Ken
Logged
graham_fuller
nsw-club
Guru
*****
Offline Offline

Model: FE
Posts: 1979


I love YaBB 1 Gold!


View Profile
« Reply #2 on: October 22, 2002, 09:27:16 PM »
0

Lincoln,
If your in NSW (Sydney) I can help you.
Regards,
Graham
Logged
RET
Administrator
Guru
*****
Offline Offline

Model: FE
Posts: 5783



richard.e.thomas ret56fe
View Profile WWW
« Reply #3 on: October 23, 2002, 12:06:40 AM »
0

It sounds like you've got it mounted aft of the coil.  It should be mounted between the coil and the petrol pump:



Hope that helps,
RET
Logged

OurCarClub.com.au is a web-based data management application, custom built for car clubs and their volunteer officials. More info...
Lincoln Lee
Guest
« Reply #4 on: October 24, 2002, 10:52:16 AM »
0

Thanks guys I live in Newman W.A. and there is no other FC,s in town.The filter was screwed to the side cover where it freely fitted the next set of holes forward it hits on the breather pipe,any further sugestions.
Regards.Lincoln.
Logged
Geoffs fe ute
Guest
« Reply #5 on: October 24, 2002, 07:17:40 PM »
0

Hey! Nice engine bay on that car.
Where do you get those decals on the engine/airfilter.

Regards geoff
Logged
RET
Administrator
Guru
*****
Offline Offline

Model: FE
Posts: 5783



richard.e.thomas ret56fe
View Profile WWW
« Reply #6 on: October 24, 2002, 10:33:23 PM »
0

"That car" won Grand Champion at the last FE-FC Holden Nationals, owned by the Guru, Ken.

Those decals can be purchased from the FE-FC Holden Car Club of Victoria.  Contact Ken for a price list.

cheers
RET
Logged

OurCarClub.com.au is a web-based data management application, custom built for car clubs and their volunteer officials. More info...
mcl1959
vic-club
Guru
*****
Offline Offline

Posts: 6155


FE's rule


View Profile
« Reply #7 on: October 25, 2002, 09:35:17 AM »
0

Lincoln, sounds like you have a problem with the breather pipe. As you can see - the filter goes just behind the fuel pump, the breather pipe is just behind the filter.
The breather pipe bottom screw is attached to the sump slightly rearward of the outlet so that the breather pipe angles bak slightly.

By the way - the Vic FE/FC club has a range of over 30 engine bay decals to suit FX to HQ.
The FC aircleaner is $6, the oil cap is $5, the Bosch coil is $5
We also have gear lever lock decals which go on the quarter vent window, "NASCO" stickers in the diamond pattern in 3 different sizes, power brake stickers for the back window etc etc etc.
Contact me for a price list and I will email it to you or I will see if I can get RET to post the list on the VIC FE/FC site.

Ken
Logged
Pages: [1]   Go Up
  Add bookmark  |  Print  

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.027 seconds with 21 queries.