wheel alignment specs

[fjmate]

Hi people - this is'nt about FE or FC holdens but i have come here out of frustration with a mates FJ holden
He has just recently restored it and brought to me for an alignment and i found the camber to be +3 degrees!
way out he tells me that nothing has been changed but the upper control arms look like theve been replaced
Is there differant control arms for these that might have been fitted ? :-/

[fjmate]

Sorry to be a pest but does'nt  anybody know of somebody that can help!

[blacky]

 Try sending a PM to Dr Terry - he has a workshop in Sydney and may be able to help .

[mcl1959]

fjmate, what is the range of readings you get when you adjust the camber setting.  Is 3 degrees positive the smallest angle you can get from the adjustment.  Maybe possible that the stub axle is bent.

Ken

[fjmate]

Hi guys , thanks for the replys , the lowest camber i can get is +3 when i adust it it goes nearly to +4 degress - its the same on both sides thats why i was asking if there were differant upper control arms available that might have been incorrectly fitted
thanks