inner sill help

[Moon]

G'day all, i am going to be replacing both outer sills on my fc sedan in the VERY near future, & have checked out the great info in here on the ways to go about it, but I will also have to replace passenger side inner sill to as it seems very sad   near it's front end. I was hoping for some enlightening   directions on best way how to go about it.
All help appreciated  
Moon.

[ASUS]

Hi ya,

Had a sniff around and found this article,  http://www.fefcholden.org.au/techinfo/tech001.html

give it ago.  I know it is the outer, but Ken wrote the article, and I'm sure he would know how to do the Inner equally as well.

another is

http://gallery.oldholden.com/Streetneat/FCute

this ute had seen the light, and came back from the deapths of rustair

here is a site if you dont have bits.

http://www.scottsoldautorubber.com.au/Holden%201956-59%20FE-FC.htm

you might also try
https://www.americanautos.com.au/secure.html

http://www.rarespares.net.au/mainind.htm

cheers

Asus :-/

[Moon]

already been there & checked 'em out  ASUS , but thanks for taking the time to have a look around & respond  
cheers,
Moon.

[mcl1959]

Moon, the front of the inner sill is difficult because it has a special shape.  Inner sill replacements are available but are just a straight section of steel.
You will have to take off the subframe and carefully remove the remains of the inner sill and manufacture a replacement piece from a suitable piece of steel.
Also attached to the inner sill is a crush section where the subframe bolt goes through.   You will probably have to remake this piece as well.
The very bottom of the inner sill at the front is where the mudguard bolts on so it is important that you get this section exactly right.

Regards   Ken

[FATBOY]

ill take some photos of my nos inner sills so that you no what u have to make if some one can up load them for me

cheers fatboy

[Moon]

Thanks for the great advice Ken  . I'll be sure to go carefuly there so I can check things out & see what I have to remake.
Cheers,
Moon.

[Moon]

FATBOY, that would be grate mate if you can put some pics up for me, it will give me some idea what I am going to be facing.
Many thanks  ,
Moon.

[fccool59]

also look through some of the rebuilds in members photos like this one http://www.fefcholden.org.au/cgi-bin/yabb/YaBB.cgi?board=album;action=display;num=1081241151;start=80,
eventually you might find something as this part nearly always needs to be replaced.