FE-FC Holden Discussion Forum
November 24, 2024, 12:54:33 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.
 
   Home   Help Search Calendar Login Register  
FE-FC Holden Discussion Forum > Technical Board > Modification Help (Moderators: RET, Glenn 'Stinky' Stankevicius, gp) > LH torana rack and pinion
Pages: [1]   Go Down
« previous next »
  Add bookmark  |  Print  
Author Topic: LH torana rack and pinion  (Read 2383 times)
Liam Moloney
Guest
« on: June 25, 2002, 07:25:51 AM »
0
Hi
I have a LH torana rack and pinion steering rack and im wondering what is involved in converting to rear mounted rack and pinion. Ive been told that the shafts are the right length but how do i go about converting my steering shaft and how do i secure it to my crossmember. What else is involved
Thanx Liam
Logged
mcl1959
vic-club
Guru
*****
Offline Offline

Posts: 6155


FE's rule


View Profile
« Reply #1 on: June 25, 2002, 10:57:51 AM »
0
This is not a job for the ametuer as proper steering priciples MUST be maintained in order to keep the steering geometry correct.  Unless you understand Bump steer and the Ackerman principle, I suggest you buy a kit from someone such as Rod Hadfield or the like.

Ken
Logged
Pages: [1]   Go Up
  Add bookmark  |  Print  
« previous next »

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.048 seconds with 20 queries.