NO BLINKERS To Blinkers on FC ute .

[slim]

A fellow has an FC ute that has never been fitted with blinkers and he asked me if putting Blinkers in this vehicle was very hard to do . He wants to know if the wiring for Blinkers on an FC ute were pre existing or does he have to wire them from the Actual blinker Body to the column.Please forgive my ignorance but Im really unsure and dont wish to lead him on a bum steer. So once he has this Mechanism What else is involved.

[mcl1959]

Slim - you need an indicator loom.  It came as part of the accessory kit for fitting indicators to a Standard etc.
You can make one by untaping a special loom, separating the reqd wires and then taping it up.   This loom entails the connectors and wires onto which the leads plug from the indicator switch, the flasher can holder, the tell tale lights and the leads to the front and rear of the body.  Note that the leads to the rear of the body end at the base of the front windscreen where they are attached to the main rear loom.
Hope this helps

Ken