FE-FC Holden Discussion Forum
December 04, 2024, 04:25:49 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.
 
   Home   Help Search Calendar Login Register  
Pages: [1]   Go Down
  Add bookmark  |  Print  
Author Topic: Re: turbo charged fc ute  (Read 3582 times)
Tony C
Guest
« on: February 29, 2000, 01:00:00 PM »
0

Hi Craig I fitted a Rajay unit to my HR sedan many years ago.I ran a 2barrel side draught Weber and 3 inch exhaust pipe out of the turbo housing with no wastegate and reduced it to 2 inch just under the gearbox crossmember with a straight thru muffler.Very scarey and very fast,it was fun.But i soon got sick of replacing head gaskets and exhaust manifold gaskets.Another problem was twisting of the U bolts that fix the universal to the diff yoke which makes it very hard to get them out to replace.the car also ended up with cracks down the centre of the firewall,right behind the motor(metal fatiuge?not sure)With no wategate it would pump to 14psi but by playing around you could get the turbine positioned so it would run at only 7psi which was plenty for around town.Be prepared for many hours of stuffing around and cursing but once it's set up you should be able to have some fun in it.Not sure about the legallity of not running a wastegate these days,it wasn't a problem back then.Might be a good idea to check with the rego guys before doing anything.Hope this is of some help. cheers Tony
Logged
Pages: [1]   Go Up
  Add bookmark  |  Print  

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.06 seconds with 17 queries.