FE-FC Holden Discussion Forum
November 27, 2024, 03:48:47 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: The FE-FC Holden Car Club of NSW are proud to host the 19th FE-FC Holden Nationals. Check out the announcement video for more.
 
   Home   Help Search Calendar Login Register  
FE-FC Holden Discussion Forum > Technical Board > Restoration Help (Moderators: RET, Glenn 'Stinky' Stankevicius, gp) > Smiths 'Beehive' heater fittings for 57 Chev
Pages: [1]   Go Down
« previous next »
  Add bookmark  |  Print  
Author Topic: Smiths 'Beehive' heater fittings for 57 Chev  (Read 2073 times)
johnonetrillion
Newbie
*
Offline Offline

Posts: 18


View Profile
« on: March 10, 2010, 03:12:13 PM »
0
Hello!

Well, I used to won a nice 62 EJ. Actually I had two of them. But this question is about a 57 Chev to be fitted with a Smiths 'Beehive' heater.

I have the heater all restored etc. and have figured out where I want to mount it. But now I am wondering what sort of fixtures I should use in hooking it all up to look right for the times.

It looks like we need some sort of 3/4" 90˚ elbow join to connect into the rubber fittings on the heater body. And then some heater hose, preferably with GM markings on it. And standard wire clamps to close it all together. (Will use the same sort of elbow joins to connect the hose to the duct unit under the dash.

Any tips?

Cheers
Logged
johnonetrillion
Newbie
*
Offline Offline

Posts: 18


View Profile
« Reply #1 on: March 10, 2010, 04:56:15 PM »
0
And for those who remember my previous topic (16778) on this:

Yes, the rubber connection pieces were found!
Logged
Pages: [1]   Go Up
  Add bookmark  |  Print  
« previous next »

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.044 seconds with 20 queries.