FC wheel cylinders

[Penguin]

I need to replace the wheel cylinders on my FC, original brakes. I found I can purchase EH wheel cylinders considerably cheaper than FC units. Is it possible to fit the eh cylinders to fc brakes?
Thanks in advance, Ben.

[Papa Smurf]

Would say no without other modifications as front FX - EK cylinder bore is 1-3/16 inch where as the EJ - EH are 1 inch & rear FB - EK are 1 inch & EJ - HR 13/16 inch.
Best check with a brake repairer as your brakes play a very important part in stopping a vehilce.

[Papa Smurf]

rear FB - EK are 1 inch & EJ - HR 13/16 inch

What I should of said was rear FX - FC 1 1/16 inch & EJ - HR 13/16 inch

[Penguin]

Thanks Lizard

[I958GM]

Dont know if this helps, but l have a complete rear end with near new cylinders, brakes,machined drums, axles and diff for $150.00 just taken out of my FC if your interested.