FE-FC Holden Discussion Forum
November 25, 2024, 03:01:15 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: The FE-FC Holden Car Club of NSW are proud to host the 19th FE-FC Holden Nationals. Check out the announcement video for more.
 
   Home   Help Search Calendar Login Register  
Pages: [1]   Go Down
  Add bookmark  |  Print  
Author Topic: 161/149 FE  (Read 3447 times)
neil armstrong
Guest
« on: August 03, 2002, 09:04:58 AM »
0

Hi everyone
I am curently doing up my FC sedan and have got up 2 the engineers report stage. Im contemplating weather to take out the 186 and use a 161 or 149 to avoid a engineers report as i want to drive my pride and joy around while im doing it up. All the major work has been done but i dont think i will pass on clearence as ive been told minimum clearence has to be 10mm, 20m, 6, and ive been told 30mm.  If i did use the 161, would i need an engineers report as i dont see the point of getting a report with the 186, then pullin it down a few years or months later to put a blown V6 in. thank you alot
Neil

Logged
RET
Administrator
Guru
*****
Offline Offline

Model: FE
Posts: 5783



richard.e.thomas ret56fe
View Profile WWW
« Reply #1 on: August 04, 2002, 02:52:40 AM »
0

Neil,

Rules vary a little from state to state, but in NSW you'll need an engineer's report for anything over 149.  The report is not that expensive (considering the cost of everything else you're doing), about $300 usually.

I appreciate you'll be up for another report when the V6 project is done, so it's really a question only you can answer: do you want to settle for a 149 and drive it now (is it currently registered?) or spend the time and money on something bigger/stronger/better and not drive it for however long it takes.

Clearance where?  You can always ring up an engineer and get the right answer.  You might have nothing to worry about.  John Varetimidis of Lohning International is a popular engineer for us in the NSW club.  (He does the engineering remarks on Street Machine's Expression Session page)  They're in Peakhurst, (02) 9533 3488

cheers
RET
Logged

OurCarClub.com.au is a web-based data management application, custom built for car clubs and their volunteer officials. More info...
neil armstrong
Guest
« Reply #2 on: August 19, 2002, 09:37:05 AM »
0

Hi.. does any one know the legal requirements for vic.  Ive been told if the replacement mototr is over 15% bigger than standard,,  you need an engineers report.
Is this corect??
thank you
neil
Logged
RET
Administrator
Guru
*****
Offline Offline

Model: FE
Posts: 5783



richard.e.thomas ret56fe
View Profile WWW
« Reply #3 on: August 19, 2002, 11:51:07 PM »
0

The information from VicRoads can be found here: http://www.vicroads.vic.gov.au/vrne/vrninte.nsf/LinkView/DB1081513CC4D2E7CA256B5F007AE7F3A0E6B550C59A6444204A171BCD2A5F8F, but it's not very helpful  :-/

Someone from the Vic club will probably respond here, but otherwise ring a local engineer, or try your luck ringing VicRoads.

RET
Logged

OurCarClub.com.au is a web-based data management application, custom built for car clubs and their volunteer officials. More info...
Pages: [1]   Go Up
  Add bookmark  |  Print  

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.034 seconds with 21 queries.