undoing tight screws in disc rotors.

[fccool59]

I have been soaking them in rost off and wd for weeks, broken 2 allen keys and 1 socket, just bought another socket (not cheap) and its starting to twist. discs are barely worn I just want to change a few studs.
Any tips?

[Just40]

inox...
http://bearep.com/index.cfm?fuseaction=product.display&Product_ID=1553
great stuff.

[fe hotrod]

 ;)Leon,from my experiance with removing HR hubs from the discs i tryed everything,but had no luck!!until someone told me that i should be untightening them using an impact driver,so i bought one,and sure enough they all came loose with a bit of friendly beating,and i also used the same method to reinstall them making sure that they were tight as possible!!!worked for me!!!cheers jamie

[Rusty_T]

 
Leon

I agree with Jamie they do work with little effort and a bit of lube.I have one and used it on some stuborn wagon bits. The bits (Bolts /Nuts ) give in to a little persuasion.

Cheers Rusty